MC TECHNOS (THAILAND) CO., LTD.
A subsidiary of Mitsubishi Corporation Technos
TEL : 0-2632-4245-7
FAX : 0-2632-4249
E-mail : contact@mctechnos.co.th
EV450T
 EV450T
Spcecial features
Wide Area for Fixture (option)

Machine Specifications
Item Feature Specification
Travel X axis travel(column, longitudinal) 22.0in
Y axis travel(table, traverse) 17.7in
Z axis travel(head, vertical) 18.1in
Distance from spindle nose to table surface 7.9in~26.0in
Table Table work area size 31.5inx17.7in
Maximum table loaded 1102.3lbs
Shape of table top surface T slot Groove 3rowsx0.71in width
Spindle Spindle speeds 40~10,000min~¹
Number of spindle speed ranges non step
Spindle taper hole 7/24 taper No.40
Inner diameter of spindle bearing Ø2.56inx4rows
Feed rate Rapid feedrate 1,968.5in/min
Cutting feedrate 0.04~1,968.5in/min
Jog feedrate 0~157.5in/min
Auto tool changer Tool shank type MAS BT40
Pull stud type MAS P40T-II
Magazine tool capacity 20tools
Maximum tool diameter Ø3.54in(No adjacent tools Ø5.71in)
Maximum tool length 11.81in
Maximum tool weight 17.63lbs (average 11.02lbs total 220.46lbs)
Tool selection method Short cut absolute address
Tool exchange time (C to C) 3.4sec
Motor Spindle motor 24.8 HP(5minute) / 20.1HP(10minute) / 14.7HP(30minute) / 10.1HP(continuous)
Axis feed motor (X) 6.03HP
Axis feed motor (Y) 6.03HP
Axis feed motor (Z) 7.38HP
Lubrication pump motor 0.004HP
Magazine drive motor 1.61HP
Cutting fluid motor (spindle) 0.24HP
(bed coolant) 0.49HP
Power Soueces Power supply AC200±10% 50Hz/60Hz±2%
AC200V±10% 60Hz/60Hz±2%
34kva
Air supply 72.5~116.0psi (supply pressure)
58.0psi (setting pressure)
132.1 gal/min (atmospheric)
Tank capacity Lubrication oil tank 0.48gal/min Tank capacity
Machine dimensions Machine height 111.4in
Floor space(width x depth) 82.7inx95.1in
Machine weight (include NC device) 9,920.8lbs
.. Copyright © 2013 MC TECHNOS (THAILAND) CO., LTD. All Rights Reserved.